--- a/.bashrc	Tue Mar 26 16:58:39 2024 -0400
+++ b/.bashrc	Wed Mar 27 15:59:55 2024 -0400
@@ -51,7 +51,7 @@
     ;;
   screen.xterm-256color)
     # Specifically, to hell with this one
-    export TERM=screen
+    export TERM=screen-256color
     # Copied from below because the Mac's bash doesn't grok ;& as a
     # passthrough
     PROMPT_COMMAND="history -a"
@@ -113,17 +113,17 @@
 # that use autoconf will do this with
 # './configure --prefix=$HOME/Installs'
 for D in $HOME/Installs/* ; do
-  if [ -d $D/bin ]; then 
+  if [ -d $D/bin ]; then
     [[ $PATH =~ (^|:)$D/bin($|:) ]] || \
     export PATH=$D/bin${PATH:+:$PATH}
   fi
 
-  if [ -d $D/share/man ]; then 
+  if [ -d $D/share/man ]; then
     [[ $MANPATH =~ (^|:)$D/share/man($|:) ]] || \
     export MANPATH=$D/share/man:${MANPATH:+$MANPATH}
   fi
-  
-  if [ -d $D/man ]; then 
+
+  if [ -d $D/man ]; then
     [[ $MANPATH =~ (^|:)$D/man($|:) ]] || \
     export MANPATH=$D/man:${MANPATH:+$MANPATH}
   fi

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/.screen/milton	Wed Mar 27 15:59:55 2024 -0400
@@ -0,0 +1,279 @@
+# $Id$
+
+vbell off
+bell_msg "^GBell in window %n"
+defnonblock 5
+nethack on
+hardstatus string "%{+b .bw}%-Lw%{+b .rw}%50L>%n%f* %t%?%{+b .cw}(%u)%{-}%?%{-}%+Lw%L< %-20=%{+b ..g} %H%-8= %{+b ..y} %c "
+hardstatus alwayslastline
+activity "^GActivity in window %n"
+
+# Some settings to try to make colors work right everywhere, hope this doesn't
+# backfire on a terminal I'm not thinking of...
+term screen-256color
+# I may only need that one after all but I'm keeping the others around just in
+# case...
+#attrcolor b ".I"
+#termcapinfo xterm-256color 'Co#256:AB=\E[48;5;%dm:AF=\E[38;5;%dm'
+#defbce=on
+
+# The following from the /etc/screenrc that came with screen-4.0.3-1.el5_4.1
+# with a few lines commented out so they don't interfere with the above.  One
+# note, the 'deflogin' setting causes a complaint on Macs because they don't
+# use it; but it's only when one starts a screen, and only for a second or
+# two.
+
+#
+# This is an example for the global screenrc file.
+# You may want to install this file as /usr/local/etc/screenrc.
+# Check config.h for the exact location.
+#
+# Flaws of termcap and standard settings are done here.
+#
+
+#startup_message off
+
+#defflow on # will force screen to process ^S/^Q
+
+deflogin on
+#autodetach off
+
+#vbell on
+#vbell_msg "   Wuff  ----  Wuff!!  "
+
+# all termcap entries are now duplicated as terminfo entries.
+# only difference should be the slightly modified syntax, and check for
+# terminfo entries, that are already corected in the database.
+#
+# G0 	we have a SEMI-GRAPHICS-CHARACTER-MODE
+# WS	this sequence resizes our window.
+# cs    this sequence changes the scrollregion
+# hs@	we have no hardware statusline. screen will only believe that
+#       there is a hardware status line if hs,ts,fs,ds are all set.
+# ts    to statusline
+# fs    from statusline
+# ds    delete statusline
+# al    add one line
+# AL    add multiple lines
+# dl    delete one line
+# DL    delete multiple lines
+# ic    insert one char (space)
+# IC    insert multiple chars
+# nx    terminal uses xon/xoff
+
+termcap  facit|vt100|xterm LP:G0
+terminfo facit|vt100|xterm LP:G0
+
+#the vt100 description does not mention "dl". *sigh*
+termcap  vt100 dl=5\E[M
+terminfo vt100 dl=5\E[M
+
+#facit's "al" / "dl"  are buggy if the current / last line
+#contain attributes...
+termcap  facit al=\E[L\E[K:AL@:dl@:DL@:cs=\E[%i%d;%dr:ic@
+terminfo facit al=\E[L\E[K:AL@:dl@:DL@:cs=\E[%i%p1%d;%p2%dr:ic@
+
+#make sun termcap/info better
+termcap  sun 'up=^K:AL=\E[%dL:DL=\E[%dM:UP=\E[%dA:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:IC=\E[%d@:WS=1000\E[8;%d;%dt'
+terminfo sun 'up=^K:AL=\E[%p1%dL:DL=\E[%p1%dM:UP=\E[%p1%dA:DO=\E[%p1%dB:LE=\E[%p1%dD:RI=\E[%p1%dC:IC=\E[%p1%d@:WS=\E[8;%p1%d;%p2%dt$<1000>'
+
+#xterm understands both im/ic and doesn't have a status line.
+#Note: Do not specify im and ic in the real termcap/info file as
+#some programs (e.g. vi) will (no,no, may (jw)) not work anymore.
+termcap  xterm|fptwist hs@:cs=\E[%i%d;%dr:im=\E[4h:ei=\E[4l
+terminfo xterm|fptwist hs@:cs=\E[%i%p1%d;%p2%dr:im=\E[4h:ei=\E[4l
+
+# Long time I had this in my private screenrc file. But many people
+# seem to want it (jw):
+# we do not want the width to change to 80 characters on startup:
+# on suns, /etc/termcap has :is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l:
+termcap xterm 'is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;4;6l'
+terminfo xterm 'is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;4;6l'
+
+#
+# Do not use xterms alternate window buffer.
+# This one would not add lines to the scrollback buffer.
+#termcap xterm|xterms|xs ti=\E7\E[?47l
+#terminfo xterm|xterms|xs ti=\E7\E[?47l
+
+#make hp700 termcap/info better
+termcap  hp700 'Z0=\E[?3h:Z1=\E[?3l:hs:ts=\E[62"p\E[0$~\E[2$~\E[1$}:fs=\E[0}\E[61"p:ds=\E[62"p\E[1$~\E[61"p:ic@'
+terminfo hp700 'Z0=\E[?3h:Z1=\E[?3l:hs:ts=\E[62"p\E[0$~\E[2$~\E[1$}:fs=\E[0}\E[61"p:ds=\E[62"p\E[1$~\E[61"p:ic@'
+
+#wyse-75-42 must have defflow control (xo = "terminal uses xon/xoff")
+#(nowadays: nx = padding doesn't work, have to use xon/off)
+#essential to have it here, as this is a slow terminal.
+termcap wy75-42 nx:xo:Z0=\E[?3h\E[31h:Z1=\E[?3l\E[31h
+terminfo wy75-42 nx:xo:Z0=\E[?3h\E[31h:Z1=\E[?3l\E[31h
+
+#remove some stupid / dangerous key bindings
+bind ^x
+bind x
+bind ^k
+#bind L
+bind ^\
+#make them better
+bind \\ quit
+bind K kill
+#bind I login on
+#bind O login off
+bind } history
+bind X lockscreen
+#
+# Example of a user's .screenrc file
+#
+
+# This is how one can set a reattach password:
+# password ODSJQf.4IJN7E    # "1234"
+
+# no annoying audible bell, please
+#vbell on
+
+# detach on hangup
+autodetach on
+
+# don't display the copyright page
+startup_message off
+
+# emulate .logout message
+pow_detach_msg "Screen session of $LOGNAME $:cr:$:nl:ended."
+
+# advertise hardstatus support to $TERMCAP
+# termcapinfo  * '' 'hs:ts=\E_:fs=\E\\:ds=\E_\E\\'
+
+# make the shell in every window a login shell
+#shell -$SHELL
+
+# autoaka testing
+# shellaka '> |tcsh'
+# shellaka '$ |sh'
+
+# set every new windows hardstatus line to somenthing descriptive
+# defhstatus "screen: ^En (^Et)"
+
+defscrollback 1000
+
+# don't kill window after the process died
+# zombie "^["
+
+# enable support for the "alternate screen" capability in all windows
+# altscreen on
+
+################
+#
+# xterm tweaks
+#
+
+#xterm understands both im/ic and doesn't have a status line.
+#Note: Do not specify im and ic in the real termcap/info file as
+#some programs (e.g. vi) will not work anymore.
+termcap  xterm hs@:cs=\E[%i%d;%dr:im=\E[4h:ei=\E[4l
+terminfo xterm hs@:cs=\E[%i%p1%d;%p2%dr:im=\E[4h:ei=\E[4l
+
+#80/132 column switching must be enabled for ^AW to work
+#change init sequence to not switch width
+termcapinfo  xterm Z0=\E[?3h:Z1=\E[?3l:is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;4;6l
+
+# Make the output buffer large for (fast) xterms.
+#termcapinfo xterm* OL=10000
+termcapinfo xterm* OL=100
+
+# tell screen that xterm can switch to dark background and has function
+# keys.
+termcapinfo xterm 'VR=\E[?5h:VN=\E[?5l'
+termcapinfo xterm 'k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~'
+termcapinfo xterm 'kh=\EOH:kI=\E[2~:kD=\E[3~:kH=\EOF:kP=\E[5~:kN=\E[6~'
+
+# special xterm hardstatus: use the window title.
+termcapinfo xterm 'hs:ts=\E]2;:fs=\007:ds=\E]2;screen\007'
+
+#terminfo xterm 'vb=\E[?5h$<200/>\E[?5l'
+termcapinfo xterm 'vi=\E[?25l:ve=\E[34h\E[?25h:vs=\E[34l'
+
+# emulate part of the 'K' charset
+termcapinfo   xterm 'XC=K%,%\E(B,[\304,\\\\\326,]\334,{\344,|\366,}\374,~\337'
+
+# xterm-52 tweaks:
+# - uses background color for delete operations
+termcapinfo xterm* be
+
+################
+#
+# wyse terminals
+#
+
+#wyse-75-42 must have flow control (xo = "terminal uses xon/xoff")
+#essential to have it here, as this is a slow terminal.
+termcapinfo wy75-42 xo:hs@
+
+# New termcap sequences for cursor application mode.
+termcapinfo wy* CS=\E[?1h:CE=\E[?1l:vi=\E[?25l:ve=\E[?25h:VR=\E[?5h:VN=\E[?5l:cb=\E[1K:CD=\E[1J
+
+################
+#
+# other terminals
+#
+
+# make hp700 termcap/info better
+termcapinfo  hp700 'Z0=\E[?3h:Z1=\E[?3l:hs:ts=\E[62"p\E[0$~\E[2$~\E[1$}:fs=\E[0}\E[61"p:ds=\E[62"p\E[1$~\E[61"p:ic@'
+
+# Extend the vt100 desciption by some sequences.
+termcap  vt100* ms:AL=\E[%dL:DL=\E[%dM:UP=\E[%dA:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC
+terminfo vt100* ms:AL=\E[%p1%dL:DL=\E[%p1%dM:UP=\E[%p1%dA:DO=\E[%p1%dB:LE=\E[%p1%dD:RI=\E[%p1%dC
+termcapinfo linux C8
+# old rxvt versions also need this
+# termcapinfo rxvt C8
+
+
+################
+#
+# keybindings
+#
+
+#remove some stupid / dangerous key bindings
+bind k
+bind ^k
+bind .
+bind ^\
+bind \\
+bind ^h
+bind h
+#make them better
+bind 'K' kill
+#bind 'I' login on
+#bind 'O' login off
+bind '}' history
+
+# Yet another hack:
+# Prepend/append register [/] to the paste if ^a^] is pressed.
+# This lets me have autoindent mode in vi.
+#register [ "\033:se noai\015a"
+#register ] "\033:se ai\015a"
+#bind ^] paste [.]
+
+################
+#
+# default windows
+#
+
+# screen -t local 0
+# screen -t mail 1 mutt
+# screen -t 40 2 rlogin server
+
+# caption always "%3n %t%? @%u%?%? [%h]%?%=%c"
+## alternative caption, gives window list, LOGNAME and current date:
+# caption always "%{wk}%?%-Lw%?%{bw}%n*%f %t%?(%u)%?%{wk}%?%+Lw %=%{mk}@%H %{yk}%D %{ck}%M%{wk} %{ck}%d %{gk}%c"
+# hardstatus alwaysignore
+# hardstatus alwayslastline "%Lw"
+
+# Red Hat's normal status line
+#hardstatus string "[screen %n%?: %t%?] %h"
+
+# bind = resize =
+# bind + resize +1
+# bind - resize -1
+# bind _ resize max
+#
+# defnonblock 1
+# blankerprg rain -d 100
+# idle 30 blanker

--- a/.screenrc	Tue Mar 26 16:58:39 2024 -0400
+++ b/.screenrc	Wed Mar 27 15:59:55 2024 -0400
@@ -4,7 +4,7 @@
 bell_msg "^GBell in window %n"
 defnonblock 5
 nethack on
-hardstatus string "%{+b .bw}%-Lw%{+b .rw}%50L>%n%f* %t%?%{+b .cw}(%u)%{-}%?%{-}%+Lw%L< %-20=%{+b ..g} %H%-8= %{+b ..y} %c " 
+hardstatus string "%{+b .bw}%-Lw%{+b .rw}%50L>%n%f* %t%?%{+b .cw}(%u)%{-}%?%{-}%+Lw%L< %-20=%{+b ..g} %H%-8= %{+b ..y} %c "
 hardstatus alwayslastline
 activity "^GActivity in window %n"
 
@@ -35,7 +35,7 @@
 # all termcap entries are now duplicated as terminfo entries.
 # only difference should be the slightly modified syntax, and check for
 # terminfo entries, that are already corected in the database.
-# 
+#
 # G0 	we have a SEMI-GRAPHICS-CHARACTER-MODE
 # WS	this sequence resizes our window.
 # cs    this sequence changes the scrollregion
@@ -82,7 +82,7 @@
 terminfo xterm 'is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;4;6l'
 
 #
-# Do not use xterms alternate window buffer. 
+# Do not use xterms alternate window buffer.
 # This one would not add lines to the scrollback buffer.
 #termcap xterm|xterms|xs ti=\E7\E[?47l
 #terminfo xterm|xterms|xs ti=\E7\E[?47l